Kisan SignalMinder SM-3SV Automatic Turn Signal Canceller

BE SURE! Do you forget to turn off the signals once in a while? It may be embarrassing when you realize it, but also quite unsafe in the traffic. SignalMinder stops the flashing automatically. You simply replace the flasher on your motorcycle. SM-3SV unit is a single wire splice-in for Suzuki, Ducati, and Triumph motorcycles with an 8-pin Kickstand Interlock. SM-3SV unit can also be used for applications where plug-in replacement of SignalMinder is not available. SignalMinder uses a computer chip to cancel the turn signals. There are three (3) selectable timeouts; 10, 20, 30 seconds. Running Light Option By attaching two quick-connect wires included, you can convert ALL FOUR turn signals to running lights and establish a dual-channel system on your motorcycle. Using the DIP Switch #1, you can select the running light intensity to be 1/2 or 1/3 brightness. With the dual-channel system, when you activate the RIGHT turn signal three times in succession, you get 4-way hazard flash function. Brake Override Option If you hook-up the 12 volt supply from the brakes, SignalMinder will suspend the time-out feature until the brakes are released. This allows continued flashing for those times when you are waiting at the signals to make a turn and do not want the time-out to cancel the flashing. Handle Bar Return Springs If above options are hooked-up, these tiny return springs can be inserted in the handlebar switch to force it back to neutral automatically. You don't have use the Push-to-cancel of the handlebar switch. Above options are not required to be installed, but utilizing them allows fully automatic turn signal cancellation. We highly recommend to hook them up. Please Note! NONE of the wires on the motorcycle have to be cut. The kit includes Scothclok brand of Insulation Displacement Connectors (IDC) to tap into existing wires.